How to Make A Water Bath for Cheesecake - Handle the Heat
Filed Under: Cheesecake | How To

How to Make A Water Bath for Cheesecake

December 31st, 2020
4.80 from 5 votes
4.80 from 5 votes

Here's how to make a water bath for baking cheesecake! This is the number one key to perfectly smooth, luscious, and creamy cheesecake that bakes evenly and without cracks.

This post may contain affiliate links. Read our disclosure policy.

Cheesecake baked in a water bath is about 100 times better than cheesecake baked without a water bath.

(As you’ll see below!)

However, preparing a water bath can be a confusing pain. Plus there’s nothing worse than spending tons of time and money on making a homemade cheesecake only to end up with a wet soggy crust because water seeped in.

perfectly smooth and creamy cheesecake with no cracks and a graham cracker crust

So today I’m sharing with you EVERYTHING you need to know to prepare professional quality water baths for PERFECT cheesecake. No cracks. No uneven baking. No sunken centers.

I promise, it’s not that intimidating. Do it once and you know how to bake cheesecake better than Cheesecake Factory for life. Your friends won’t let you show up without a homemade cheesecake to any future party.

Tips for Cheesecake Water Baths

What is a water bath?

tinfoil wrapped around a springform pan for a cheesecake water bath

A water bath is a method for gently baking a cheesecake in its pan inside another pan filled with boiling water in the oven. It’s also called a bain marie. It’s used for a lot of custard preparations, such as flan and crème brulee. Cheesecake is essentially a custard (not a cake!) since it’s so rich with dairy and eggs.

Why is it so important to bake cheesecake in a water bath?

The number one key to perfectly smooth, luscious, and creamy cheesecake that bakes evenly and without cracks? Low and gentle heat!

A water bath is the best way to ensure that kind of baking environment. Even when you set your oven to 325° to bake a cheesecake, the temperature inside the water bath generally won’t exceed 200°F.

This low and gentle heat evens out the baking so that the outside of the cheesecake doesn’t become tough, rubbery, burnt, or curdled before the inside can finish baking.

step by step process for baking a cheesecake with a water bath

You can achieve a similar effect by baking for a long time at a really low oven temperature, but who has the time for that? Additionally, older ovens aren’t reliable at maintaining an accurately low temperature.

A water bath is truly the best way to bake a flawless cheesecake. Just take a look below at what a difference a water bath makes.

Cheesecake water bath vs. cheesecake without water bath:

side by side comparison of cheesecakes baked with and without water baths
side by side comparison of cheesecakes baked with and without water baths
side by side shot of overhead cheesecakes baked with and without water baths

When you need a cheesecake water bath:

Any full-size cheesecake recipe. Especially classic cheesecake, or any recipe when you really don’t want cracks.

When you don’t need a water bath:

You don’t need one for cheesecake bars, mini cheesecakes, and of course no-bake cheesecake recipes. Bars and mini cheesecakes are thinner than a normal cheesecake, so they cook more evenly.

How to bake in a water bath when the recipe doesn’t call for one:

If the recipe doesn’t call for a water bath, you don’t need to use one.

However, if you want all of the amazing benefits listed above, then simply prepare the water bath as directed down below. Since the water bath cooks more gently, you’ll likely need to increase the baking time. Generally you can bake at 325°F for about 1 hour 15 minutes, depending on the volume of cheesecake batter.

What you need for a water bath:

  • A high-quality springform pan
    Even the best springform pans aren’t truly “leakproof,” no matter what their packaging claims. However, it’s important to have one that’s heavy duty and high quality for durability and to avoid rusting.
  • Larger baking pan, cake pan, sauté pan, or roasting pan
    This is the water bath pan so it must fit the springform pan inside. You can also place a large disposable foil pan on top of a rimmed sheet pan for the water bath. Ideally you want something that’s just a couple inches larger than the springform pan.
    If you don’t have a pan big enough, I’ve listed some alternative options at the bottom of this article. Just note they won’t be quite as good as a true water bath.
  • Wide heavy duty aluminum foil
    This helps prevent leaks as you’ll see below. I usually buy this from Costco. It’s important for it to be wider than the diameter of the springform pan so water doesn’t seep through the seams and cracks of the foil.
  • Heat safe oven bag or slow cooker bag
    This is an optional bonus. Wrapping the springform pan in a heat safe oven bag really helps ensure no water seeps in! Much more foolproof than foil. I like to use BOTH to truly seal off the water.
  • Boiling water
    A kettle with a spout is the best way to quickly boil water and safely pour it into the roasting pan without splashing any in the cheesecake batter.

How to prevent a water bath from leaking?

Using a high quality springform pan, wide heavy duty aluminum foil, and an oven bag is the best way to all but guarantee you won’t have any leaks!

Alternatives for cheesecake water bath:

1. Low heat & slow baking time

Since the effect of the water bath is to cook the cheesecake custard filling slowly and gently, an easy alternative is to bake the cheesecake without the water bath but in a 275°F for 1 hour 45 minutes. This technique can be a bit tricky and not always a guarantee against cracks if your oven is older, as shown in the comparison below:

pumpkin cheesecake baked without a water bath

On the left is my Classic Cheesecake recipe baked with a water bath. No cracks. On the right is my Pumpkin Cheesecake recipe baked low and slow. You can see a crack still formed. What’s interesting is when I use this method in my home oven with my less than 5 year old electric oven, the crack is usually pretty minimal.

However, when I used this method at my photographer’s house with her older oven the crack was more pronounced. So if your oven is old and doesn’t maintain a low temperature consistently and accurately, this may not be the best method for you. However, if you have a newer or more accurate oven then this may be perfect for you!

2. Tray of water on the bottom oven rack (beneath springform pan)

This is perfect for those of you who don’t have a large enough pan to act as the water bath vehicle. OR, if you don’t have heavy duty aluminum foil or oven bags and are worried about water leaking in.

Simply place a tray of boiling hot water on the bottom rack of your oven, beneath the middle rack where your springform pan bakes.

Even though you’re not baking the springform pan directly in water with this method, it’s still a good idea to wrap the pan in foil to help shield it from the oven’s heat. You can even use insulated cake strips to protect it!

Cheesecake Recipes to Try:

4.80 from 5 votes

How to make
How to Prepare A Cheesecake Water Bath

Here's how to make a water bath for baking cheesecake! This is the number one key to perfectly smooth, luscious, and creamy cheesecake that bakes evenly and without cracks.


  • 1  high quality springform pan
  • 1 Larger baking pan, cake pan, sauté pan, or roasting pan
  • Wide heavy duty aluminum foil
  • Heat safe oven bag or slow cooker bag
  • Boiling water


Bake your graham cracker crust

  1. Prepare your crust, press it into your springform pan, and bake as the recipe directs. Let cool completely. You can do this step first if it’s awkward to press the crust into the pan with the foil already wrapped around it. Also, the oven racks can pierce your foil wrapping which defeats their entire purpose.
  2. Alternatively, you can wrap your pan in foil & bag before pressing in the crust if you don’t want to wait for the pan to cool down completely after baking the crust to prepare the water bath. It’s personal preference, either way will work.

Prepare your springform pan

  1. To seal off the springform pan, place a large square of heavy-duty aluminum foil underneath the pan. You want the heavy-duty stuff that creates bigger sheets of foil to completely encompass the base of the pan. Gently fold the edges up and around the pan. Repeat twice so there’s three sheets of foil to ensure a waterproof seal.
  2. OPTIONAL BONUS STEP: Place the foil wrapped springform pan inside the oven bag, if using. Roll down the oven bag and fold the top down so it’s flush with the edge of the pan.
  3. Bring your kettle of water to a boil
  4. A kettle is really the best option since you’ll avoid spills and splashes. If you don’t have one, bring your water to a boil in a pot then pour into a large glass measuring cup with a spout.

Prepare your water bath pan

  1. Once your crust is cooled and your water is boiling, pour the cheesecake batter into the cooled springform pan. Place the springform pan inside your bigger water bath pan. Place both pans on the middle oven rack into the preheated oven.
  2. Carefully pour the boiling water into the water bath pan, pouring only halfway up the sides of the springform pan. You want enough water that it won’t evaporate, but not so much that it’ll splash into your batter.

Bake as the recipe directs

  1. When baking a cheesecake in a water bath, the directions are generally to bake at 325°F for 1 hour to 1 hour and 15 minutes. The cheesecake is done when the top looks dry but the center still wobbles and jiggles like jello. It should not be liquidy at all.

Turn off the heat and crack the oven door to cool

  1. This step is optional, but further helps to prevent cracks from forming. Turn off the oven, crack open the oven door, and allow the cheesecake to cool inside the oven undisturbed for 30 minutes to 1 hour.

Remove the springform pan only

  1. Carefully remove the springform pan from the water bath. Unwrap the foil and transfer it to a cooling rack. Run a thin-bladed flexible knife around the edge of the cake to make sure it’s not sticking to the sides (which can cause cracks as it cools). Let the cheesecake cool completely to room temperature on the rack before moving to the fridge to chill.

Recipe Video

Course : Dessert
Cuisine : American
Keyword : cheesecake, water bath for cheesecake

Photos by Ashley McLaughlin.

Tessa Arias
Author: Tessa Arias

I share trusted baking recipes your friends will LOVE alongside insights into the science of sweets. I'm a professionally trained chef, cookbook author, and cookie queen. I love to write about all things sweet, carb-y, and homemade. I live in Phoenix, Arizona (hence the blog name!)

Tessa Arias

About Tessa...

I share trusted baking recipes your friends will LOVE alongside insights into the science of sweets. I'm a professionally trained chef, cookbook author, and cookie queen. I love to write about all things sweet, carb-y, and homemade. I live in Phoenix, Arizona (hence the blog name!)

Find Tessa on  

Leave a Comment & Rating

Add a Review or Question

*Please select a rating to complete your comment.

Recipe Rating

  1. #
    Nicki Moreno — November 7, 2023 at 4:10 am

    Could you share what you think are the best springform pans and foil (brand wise)?

  2. #
    Donna Cohen — October 21, 2023 at 7:07 pm

    The best way ever!

  3. #
    Lori — October 19, 2023 at 7:57 am

    Thank you for these tips. I do however have a question have you ever baked more than one cheesecake at a time?
    I was wondering if it would be possible to put two cheesecakes on the top rack and a water bath on the bottom rack.

    • #
      Kiersten @ Handle the Heat — October 19, 2023 at 1:56 pm

      Hi Lori! We have not tried baking two cheesecakes at once. I would worry that this would make it difficult for the air to circulate properly in the oven, preventing an even bake – but of course, feel free to experiment and let us know how it goes if you give that a try!

  4. #
    Ulf — September 19, 2023 at 5:58 am

    Good day,

    Just a quick question. Whats better top and bottom heat or circulating air ? 325 F is that 160 Grad ?

    Best regards Ulf

    • #
      Kiersten @ Handle the Heat — September 20, 2023 at 7:58 am

      Hi Ulf! It depends on what you’re baking when choosing convection vs. conventional baking methods (more information in Tessa’s article on ovens here). Specifically regarding cheesecake, conventional is best, to avoid the air blowing around the cheesecake too much and hopefully ensure a perfect cheesecake. If your oven has the ability to bake from either the bottom or top using conventional cooking, the heat from the bottom is best with cheesecake, to ensure the top doesn’t overbrown. If it’s top and bottom, watch your cheesecake closely and tent loosely with foil if browning starts to occur. The most important thing with any baking is to ensure your oven rack is positioned in the middle of the oven, to ensure your baked goods aren’t too close to the heat source, and to allow an even distribution of browning. I hope this helps, and I hope you’ll give one of Tessa’s delicious cheesecake recipes a try! Happy baking 🙂

  5. #
    Sharan — September 14, 2023 at 4:18 am

    Hi there, I don’t have another cake pan that I can put my springform cake pan into, so I have been wrapping it in 2 layers of foil and placing it directly into a roasting tray with some water. I do notice cracks appear in my cheesecake, but it stays dry. I’m not leaving the cheesecake to cool down in the oven with the door open, though. What do you think could be the cause of the cracks and is the method of using a roasting tray as the Bain Marie ok?

    • #
      Kiersten @ Handle the Heat — September 14, 2023 at 2:28 pm

      Hi Sharan! It sounds like your method is just fine, especially if your cheesecake is staying dry! I think your cheesecake cracks are due to your lack of cooling it inside the oven slowly, as you suspect. Try sticking a wooden spoon in the oven door to prop it open, leaving it inside the off oven for an hour or so, and then at room temperature for a few hours or until completely cool, before placing in the fridge overnight. Once completely and thoroughly chilled, then remove the springform. This should help your cheesecake stay beautiful and crack-free. Also, be sure you’re not overmixing once your eggs are added, as this can also create cracks. I hope that helps! Happy baking 🙂

  6. #
    Joy — September 10, 2023 at 1:07 pm

    Can you make a cheesecake in a regular pan?

    • #
      Kiersten @ Handle the Heat — September 11, 2023 at 9:06 am

      Hi Joy! Generally, cheesecake is made in a springform pan for easy removal of the cheesecake from the pan. You could use a regular pan (as long as it’s the same size as the springform pan listed in the recipe), but it won’t come out as cleanly or look as pretty. We recommend using parchment paper with tabs like these, so you can more easily remove your well-chilled cheesecake from the pan. I hope that helps! Happy baking 🙂

  7. #
    Cheryl — May 27, 2023 at 12:51 pm

    I agree with you COMPLETELY that water bath baking is THE BEST way to make a cheesecake. I too have had those ugly surface cracks occur, then it has to be be topped with fruit or something to cover it up. May I suggest forgetting about wrapping in tin foil and oven bags and just use an Easy Bath Cheesecake Wrap- silicone springform pan protector that will not allow water into the springform pan. Period, end of story!

  8. #
    Karen Selznick — November 25, 2022 at 1:00 pm

    I’m out of town for a month and my
    son in law asked me to make a cheesecake.
    I went straight to Handle the Heat
    ( of course!)
    I have NEVER MADE such a perfect cheesecake . I used the water bath method which was easy and in the end was beautiful.
    The cake tasted so creamy and the best cheesecake ever!

    • #
      Kiersten @ Handle the Heat — November 28, 2022 at 1:45 pm

      We are honored you came here first, Karen! So glad the cheesecake turned out so perfect 🙂

    • #
      Rod Minor — August 26, 2023 at 8:03 am

      What temperature and how long do I bake when I mix cake batter with cheesecake batter?

  9. #
    Lisa — November 23, 2022 at 4:22 pm

    It worked!!, I followed your instructions to a tee. My cheesecake recipe has 8 ounces more of cream cheese. It required more baking time. No cracks!! Thank you!

    • #
      Kiersten @ Handle the Heat — November 23, 2022 at 5:02 pm

      So glad to hear this worked for you, Lisa!!

  10. #
    Lisa — November 18, 2022 at 4:52 pm

    When I make a cheesecake, I never prebake the graham cracker crust. I press the graham cracker crust into the pan and fill with the cheesecake mixture and bake. Won’t the graham cracker crust be overcooked ?

    • #
      Kiersten @ Handle the Heat — November 21, 2022 at 12:22 pm

      Hi Lisa! It does not get overcooked in our experience, but feel free to skip that if you prefer! Happy baking 🙂

  11. #
    Ashlee — August 11, 2022 at 9:46 am

    My oven is a gas conventional oven which have 2 racks only, fire on top & bottom.

    If i choose to put another pan with water in rack under cheesecake pan, it mean i must put the cheesecake pan in top rack which close to the fire. The space between fire & rack is very close less than 15 centimeters.

    Which fire should i use to bake? Top & bottom?

    Could you suggest where can i get the oven heat bag please? Any link of your preference bag? Itsnot available in my country.


    • #
      Kiersten @ Handle the Heat — August 11, 2022 at 2:02 pm

      Hi Ashlee! Just to clarify – the foil-wrapped cheesecake pan goes inside the bag, and all of that goes inside the water bath, so the cheesecake bakes sitting inside the water bath. The foil and bag are there to protect the cheesecake from getting wet while it bakes inside the water bath. I hope that makes sense! I would recommend baking on the bottom rack, if the top is very close to the heating element, and also I would recommend dropping the temperature a little, because convection ovens tend to bake a little higher than regular ovens. Also, here is a link to the bags we are referring to. Please reach out if any of this doesn’t make sense! Good luck 🙂

  12. #
    Lavisha — February 28, 2022 at 10:25 am

    Hi I tried this method and really surrounded the pan with foil. I didn’t use a roasting bag.
    The cheesecake turned out great but the base was soggy . Can’t understand why as it was sealed really well

    • #
      Emily — February 28, 2022 at 4:08 pm

      Hi Lavisha! I wish we could have been there baking along with you so I could say for sure, but is it possible your foil may have gotten punctured? How was the top of your cheesecake, did you notice any large, watery bubbles appearing on the surface or edges while it baked? Also, which way did you pre-bake your crust (baked as directed then wrapped in foil or wrapped the pan in foil prior to baking)?

  13. #
    David Ganon — November 28, 2021 at 6:54 am

    Hi — thanks for this helpful recipe! I misread the directions and put the oven bag around the springform pan first, and then did the foil. My cheesecake came out perfectly, with no cracks, so no complaints at all.. But there was a lot of liquid in the oven bag. It looked like water rather than leaked batter. Either way, the liquid didn’t get to the crust. But is it likely that the bag wouldn’t have filled with liquid if I’d done it right and used the foil and THEN the oven bag?

    • #
      Emily — December 1, 2021 at 12:21 pm

      Hi David! Hmmm…If I’m reading this correctly, it sounds like there may have been a rip or hole somewhere in your foil/bag. The foil and bag should completely prevent any water from not only reaching the springform pan, but they also shouldn’t fill with water themselves. Reversing and having the bag on the outside will help any leaks as long as there are no holes 🙂 Please let me know if I misunderstood your question. I’m so glad your cheesecake still turned out perfectly!

  14. #
    Liz — August 3, 2021 at 6:53 pm

    Do you have a recommendation for a pan for the water bath (the large roasting pan, not the springform pan). Thanks!

    • #
      Emily — August 4, 2021 at 9:43 am

      Hi Liz! We actually don’t have a specific recommendation for a large pan to use as it can literally be anything! Tessa has used her largest skillet or giant square cake pan (wedding cake size) if that helps 🙂

  15. #
    Luis Espinoza — July 26, 2021 at 6:41 pm

    Hi Tessa
    I would like to ask you something, if I have to bake 4 cheesecakes a day in a gas convection pastry oven, can you imagine all the work involved in having to line each pan with aluminum foil, and fill the oven with baking trays with
    hot water, and the cost that this has?
    Or is it that the water bath process only applies to home ovens?

    • #
      Emily — July 29, 2021 at 9:26 am

      Hi Luis! Water baths aren’t just for home ovens. The only alternative since you’re using a pro oven is to simply bake at a super low temperature for a longer period of time, but you’ll have to experiment with that.

  16. #
    Tina Kalayil — May 25, 2021 at 3:22 am

    If I am not using a springform pan, but a normal pan, should I wrap it with aluminum foil as well?

    • #
      Tessa — May 26, 2021 at 9:00 am

      You shouldn’t need to with a normal pan. Springform pans have quite a few areas that water can leak into, unlike a regular pan 🙂 I’d highly recommend getting a springform pan for cheesecake though! It makes it so much easier to slice and serve, reducing the stress of breaking/damaging the cheesecake in the process.

      • #
        Tina K — May 27, 2021 at 10:55 pm

        I do own a springform pan. But it is 9 inch wide and I own a portable oven, that holds only a maximum of 10 inch wide dish. So trying to figure out how to fit everything in for a water bath. Thanks for the reply. Love your recipes, especially the lemon pound loaf cake. Greetings from India !

        • #
          Tessa — May 28, 2021 at 10:02 am

          You could always try the suggested alternative of placing a tray of water on the bottom oven rack beneath the springform pan if that would be possible! Good luck! And thank you so much for your kind comment, I’m so happy to hear you love my recipes-I agree, the lemon pound cake is SO GOOD! 🙂

  17. #
    Carol — January 17, 2021 at 3:00 pm

    What kind of springform pan do you recommend? I’ve taken your advice on your cookie sheets & now I’ve gotta buy a new springform pan. Thanks

Join the Handle the Heat Community

Cookie Customization Chart
Do you want a more delicious life?
Instead of digging through cookbooks and magazines and searching the internet for amazing recipes, subscribe to Handle the Heat to receive new recipe posts delivered straight to your email inbox. You’ll get all the latest recipes, videos, kitchen tips and tricks AND my *free* Cookie Customization Guide (because I am the Cookie Queen)!
As Seen On....
NPR People Time Glamour Readers Digest The Huffington Post BuzzFeed